Insulated Pool Kit Equipment

Equipment and Materials Lists













Your cart is empty.


Insulated Pool Kits

All kits include the EPS pool wall panels and fiber-mat reinforcing fabric (polypropylene mesh) 10/12 Pool Design

Includes construction installation manual, engineering calculations, pool specifications, setting and excavation plans, and wall sections

The Insulated Pool Kits can be purchased in one of two ways:
(1) as a kit with the EPS panels and mesh alone,
(2) as a kit with the EPS panels, mesh and EVM Coating (roll-on or spray-on) interior finish

8/15
#8/1517x25

#9/316x23

#10/313x32

Can provide all your equipment needs and recommend using energy-efficient equipment.

Round spas can be purchased in any radius.

7/4 Pool Design Small pools can be used as spas (or spools) by adding a spa features equipment package and heater.

Ask about other shapes that can be used for spas, spools or swim gym spas. 8/3 Pool Design

You can also change the shape or size of your pool structure by adding curved or straight panels in 3 ft. 3 in. lengths
make any design or shape larger as needed at $115.00 per panel.

Standard designs are priced at $35 per Ln. Ft. of wall panel.

Custom designs are priced at $40 per Ln. Ft. of wall panel.

You can purchase additional panels, equipment and other items.

Steps are included with most of the Spa Kits, but need to be purchased separately for the Pool Kits for $1,050.00.
This is because you can order your step kit customized instead of the standard straight step kit in either longer steps, or wedding cake steps. Wedding cake steps are priced separately according to size and shape. Most step kits contain ample material for the steps as well as enough to build a bench seat.

Prices are individually shown at the right of each pool design. For budgeting purposes, you can allow the same amount for the other items listed under "Other Parts You Need to Source..."

10/5
#10/518x33

#10/814x32

#10/920x33

You may also want to consider purchasing our Floor Barrier Insulation if you are in colder climates. When you purchase any of the equipment or EVM Coating products they will be shipped to you freight included. Current shipping time is approximately 7 to 14 days from receipt of order and funds have cleared. In all of our quotes, we give you a list of the materials (i.e., gravel, concrete, etc.) and approximate amounts required so you can get an estimate of your costs. In addition, you would need to add the cost of the equipment you are purchasing and any coping and concrete around the pool for an approximate total budget for your project.

Click on desired shape below. For more selections, click Next.

Pick a specific pool design below, then click that design to view price options.

Results: 81 - 89 of 89 | << Prev - 1 - 2 - 3 - 4 - 5 - Next >>
12/515x37
473 ft.2
Pool Walls Only  $3,220.00 
Pool Wall Kit w/ EVM Coating (Roll-on or Spray-on Finish), No Equipment  $6,293.00 
Steps (24 Ln. Ft.) Bench Seat (6 Ft.)  $1,050.00 
 
12/5A18x45
740 ft.2
Pool Walls Only  $3,920.00 
Pool Wall Kit w/ EVM Coating (Roll-on or Spray-on Finish), No Equipment  $8,055.57 
Steps (24 Ln. Ft.) Bench Seat (6 Ft.)  $1,050.00 
 
12/622x39
638 ft.2
Pool Walls Only  $3,675.00 
Pool Wall Kit w/ EVM Coating (Roll-on or Spray-on Finish), No Equipment  $7,409.30 
Steps (24 Ln. Ft.) Bench Seat (6 Ft.)  $1,050.00 
 
13/122x41
630 ft.2
Pool Walls Only  $3,675.00 
Pool Wall Kit w/ EVM Coating (Roll-on or Spray-on Finish), No Equipment  $7,899.50 
Steps (24 Ln. Ft.) Bench Seat (6 Ft.)  $1,050.00 
 
13/216x40
594 ft.2
Pool Walls Only  $3,570.00 
Pool Wall Kit w/ EVM Coating (Roll-on or Spray-on Finish), No Equipment  $7,141.65 
Steps (24 Ln. Ft.) Bench Seat (6 Ft.)  $1,050.00 
 
13/323x42
704 ft.2
Pool Walls Only  $4,375.00 
Pool Wall Kit w/ EVM Coating (Roll-on or Spray-on Finish), No Equipment  $8,688.78 
Steps (24 Ln. Ft.) Bench Seat (6 Ft.)  $1,050.00 
 
16/17x52
660 ft.2
Pool Walls Only  $5,040.00 
Pool Wall Kit w/ EVM Coating (Roll-on or Spray-on Finish), No Equipment  $9,648.40 
Steps (24 Ln. Ft.) Bench Seat (6 Ft.)  $1,050.00 
 
18/126x59
1540 ft.2
Pool Walls Only  $6,195.00 
Pool Wall Kit w/ EVM Coating (Roll-on or Spray-on Finish), No Equipment  $13,669.66 
Steps (24 Ln. Ft.) Bench Seat (6 Ft.)  $1,050.00 
 
20/132x65
2178 ft.2
Pool Walls Only  $6,405.00 
Pool Wall Kit w/ EVM Coating (Roll-on or Spray-on Finish), No Equipment  $15,543.20 
Steps (24 Ln. Ft.) Bench Seat (6 Ft.)  $1,050.00 
 
Results: 81 - 89 of 89 | << Prev - 1 - 2 - 3 - 4 - 5 - Next >>

return to top

Equipment and Materials Lists:

All pool kits include the EPS panels and fibermat reinforcing fabric (mesh) along with a construction installation manual and CD (view in Windows Media Player), engineering calculations and pool specifications, setting and excavation plan with a wall section. The Insulated Pool Kit can be purchased in one of two ways; (1) as a kit with the panels and mesh alone, or (2) as a kit with the panels, mesh and the EVM Coating interior finish. (roll-on or spray-on).  Equipment quoted separately. You can also purchase additional panels, equipment and other items.

Pool Parts for construction Parts Supplied* with all kits
and additional items available for purchase
Pool or Spa Wall panels (various designs and sizes) *
Reinforcing Mesh *
Step & Bench panels
Floor Insulation Barrier
(under concrete or for perimeter)
(if needed for colder climates)
Skimmer Box
Inlet/outlet fittings
Cartridge or Sand Filter
(We recommend using cartridge filters.)
Pump (can be upgraded to Two-speed or Variable)
Pool Light
(White or Colored LED)
EVM Coating Interior Finish (Roll-on/Spray-On)

Pool Parts for construction Parts You Need to Source (materials can be purchased from any local home building supply store)

Pool Excavation

Gravel – 3/4" crushed (AB/Roadbase to cover excavated area)
Construction Adhesive
(Ener-Bonder foam adhesive or similar)
#16 Penny Nails
(for temporary anchoring while gluing panels)
3/8” or 1/2” Galvanized Steel Rebar for Ringbeam
Galvanized Steel Fence Posts
(Tri-Star Pickets)
Tie-back smooth wire –
#9 Galvanized
2” diameter pipe
Fittings
90 elbows
45 elbows
Tees
Ball Joint Valve
PVC Pipe Glue
Sand for Sand Filters
(not necessary for Cartridge filters)
3/8" Pea Gravel (for back-fill behind pool walls)
Concrete
Interior Finish
(We offer EVM Coating, but for pre-fabricated vinyl liner-use other manufacturers)
Liner Extrusion
(for prefabricated liners only)
Foam Wall Underlay
(for prefabricated liners only-under steps and benches)
Pool Tile (for EVM Coatings or fiberglass coatings)
Coping and decking

Standard and Additional Equipment

When ordering equipment for your pool there are a lot of things to consider. How are you going to use your pool? What do you want on it...just the standard, energy-efficient equipment...or...do you want something more? Speak with our pool consultants about your particular needs and what we can suggest for you to consider to help you with the maintenance and upkeep of your swimming pool.

You can purchase standard equipment such as pumps, filters, returns, inlets with eyeballs, lights and skimmers with extension collars. There are lots of equipment options available; we can provide you with any product, any brand that is appropriate for the pool or spa you are building.  Any pool or spa kit ordered from Insulated Pool Kits can be customized by using any of the name brand products from the suppliers (just to name a few) listed below.

       

Auto-Fills, Automatic Pool Covers, Automatic Sanitation System, Automation Controllers, Filters, Hand Rails, Heat Pumps, Heaters (Natural Gas and Propane), Automatic and Robotic Pool Cleaners, Standard Pool or Spa Lights or Colored or LED Lights, Pumps, Water Features including: Custom-made Waterfalls, Deck Jets, and Sheer descents (some water features require an additional pump).

In today’s age of soaring power bills and energy demands, it's important to consider energy-efficient equipment options that can maximize your pool investment by saving money on energy costs.  Depending upon utility rates, pool characteristics and the equipment selected, energy efficient products can significantly produce savings that could possibly recoup the premium cost of an upgrade to an energy efficient product during the first year of operation.

Example:

Variable or 2-Speed Pumps = up to 75% savings on your energy costs
Automatic Pool Cleaners = up to 94% savings on energy costs versus pressure cleaners
Cartridge Filters (vs. sand filters) = up to 92% savings and are more energy efficient and environmentally-friendly less chemically polluting particularly with rinse vs. backwash water
Electric Heat Pumps = up to 80% savings on your heating costs
Natural Gas or Propane Heaters = up to 86% savings on energy costs from improved hydraulics
LED Lighting = up to 79% savings on energy vs. other lighting
Automatic Pool Controls = up to 75% on energy costs by managing equipment

See just one example when comparing filters:

 


Our company recommends all energy-efficient equipment for your pool, such as a cartridge filter, a variable or 2-speed pump. Additionally, you might want to consider environmentally-friendly salt water chlorination systems, such as NexaPure (eliminates adding chlorine and in some cases can be ordered with automation products) . The other is a pool cover; our company recommends and offers Aquamatic Pool Covers.

If you wish to get a specific cost for any of the equipment, please call or e-mail us with your preferences. Our prices for special equipment for pools and/or spas are close to wholesale prices because of our buying volume and are very competitive.


2024 All Rights Reserved - Insulated Pool Kits
site by AnInternetStore.com